There's a lot of composite info here. http://www.fibreglast.com/contentpag...enter-286.html
Here's the one on infusion http://www.fibreglast.com/documents/361.pdf
I've been doing a lot of composite research recently, and vacuum infusion doesn't really seem much more difficult than standard vacuum bagging, imo. I haven't tried it, though.
__________________
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |