Originally Posted by guydrisc  i dont have mx9 disk or the maintance package for my mx3... there are no certain rules or anything.. if someone could send me programs they have written for their OSP would be cool that way i could compare them to my programs to see what i am missing. |
How about giving us an example job?
i.e. Mill a flat face, say 100x100 (mm) using a 40mm cutter
Machine a square 10mm deep around the profile of this face to, say 90x90, using cutter rad comp.
Drill and tap 2 M16x2.0p holes in the face somewhere.
A fairly simple straight forward program that covers many different operations and tools.
Show us the resulting program and then we would all be operating from the same point of view.
Brian.