Originally Posted by Xerxes  This is a thread where everyone is free to post their videos showing machines controlled by VSD drives in action. Here is couple from me:
---------
This video demostrates VSD-E drives drives controlling a laser diode characterization instrument.
The video demostrates VSD-E's automatic homing function at power-up. While doing homing motion to left, drive gently detects mechanical stop of axis (no mechanical limit switches are needed). After axis end has been reached, drive continues to opposing direction and searches encoder index pulse for most precise homing.
The machine has 2 axis, both in same direction and stacked. The upper linear stage has short travel and higher mechanical precision for microscope camera movement. The lower stage (long travel) has a 150W BLDC servo motor and upper stage has a small 10W DC servo.
YouTube - Servo axis homing with VSD-E drive
---------
This is same machine as above but this video shows some operation and jogging of machine from PC.
All motion control (accel & decel ramps, velocity control, torque limiting, axis travel limiting) are done internally in VSD drives. PC sends only simple move commands to drives thru USB bus.
YouTube - Servo motor control with VSD-E
Comments & new videos are greatly appreciated  |
I contact you for your VSD -E drive
I make a mail in this week to ask you informations before buy it
I think it's great drives :-)
I want to install a Smooth Stepper
I contact you on the week because it's not easy for me to write in english, I need a little time :-)
I have a workshop in FRANCE, i make parts bikes with CNC Mill but I want to use servo motors for speed
Regards
François CHARLOT
my mail :
CFrancoischarlot@aol.com