Originally Posted by marchantdice  Our new stock (1050, 800, 800 110V): The Kress collet nut has been redesigned....the "C" shaped snap / retaining ring has been removed from the Clamping Nut.....the internal machining has a very small raised profile, collets can be removed using light fingure pressure (www.worldofcnc.com)
NB: Kress Stock, Spare Collet nuts have the retaining ring.. |
Please also note, the new design clamping nut has a smaller thro' bore, now 8.4mm (was 10.5mm)