COMPLETE FANUC 5 CONTROL


Results 1 to 4 of 4

Thread: COMPLETE FANUC 5 CONTROL

  1. #1
    Registered
    Join Date
    Mar 2010
    Location
    usa
    Posts
    20
    Downloads
    0
    Uploads
    0

    Default COMPLETE FANUC 5 CONTROL

    Just an FYI, I have a complete Fanuc 5M contol from an old Matsurra VMC that we scrapped years ago. Was saving it for parts while we still had 5's running on other Lathes & mills, but never needed anything off it. Now all my Fanuc 5 machines are gone, and I don't think I will have anymore in the future, so contol needs a new home. No resonable offers refused.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jan 2014
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Is this Fanuc 5M control still available??



  3. #3
    Registered
    Join Date
    Jan 2014
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Is this control still available and where is it located I might be interested in it



  4. #4

    Default Re: COMPLETE FANUC 5 CONTROL

    hey guys i got an heidenreich und habeck fm38 with a fanuc 5m control milling maschine i bought it for only a few bugs, and now i feel a bit screwed,
    because the preowner gave me 5 books full of documentation that are ****.
    the good thing is when i connetct compressed air and current it start its fans and the display and seems to life.
    but i cant get it in ready mode.
    has some one anything i could use?
    thanks in advance



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

COMPLETE FANUC 5 CONTROL

COMPLETE FANUC 5 CONTROL