Originally Posted by zephyr9900  The Tormach is set for pretty good accel/decel so I think a controlled stop might work (though I know that in some cases, depending on the vector being processed it doesn't alway decel immediately and that could be a problem).
Randy |
Unless I am mis-understanding you or something if the door should come open and the contactor drops then there is no decel (just a dead motor). The few times it happend to me I heard the spindle slowing down on it's own. This was a good thing because I was able to run over and hit the mushroom and sometimes save the tool/part because it kept cutting while I was running! Finding 0,0 on the XY again sucked, but if during a roughing pass you still got some real estate to work with.