Originally Posted by JFettig I always do what huflungdung does or says to do, just draw it up in cad and take my dimentions off the readout thing or something similar.
There is a partially decent free cad program out there that is pretty much an autocad clone, its called a9cad by a9tech.
http://www.a9tech.com/download/
Jon |
Hey, my first disciple!  Welcome, my son.
__________________
First you get good, then you get fast. Then grouchiness sets in.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |