One more question witch would be better for my motors. the 4: KL-6050 Microstepping Driver, Heat sink is included, $59.95
Specification
Features of this driver
* Supply voltage up to 60VDC, current output up to 5.0 A peak
* Resolutions: 1/2, 1/8
* Over Voltage, Over Heat, Over Current Protection
* Suitable for 4,6,8 lead motors
* DIP switch current setting:
1.5A,2.0A, 2.5A,3.0A,3.5A,4.0A,4.5A,5.0A
Or the KL- 4030 Microstepping Driver, Heat Sink is included, $54.95/pcs
Specification
Features of this driver
* Voltage up to 24 to 40VDC, current output up to 3.0 A
* Selectable resolutions, 1,1/2, 1/4, 1/8, 1/16, 1/32, 1/64
* Suitable for 4,6,8 lead motors
* DIP switch current setting:
0.9A,1.2A,1.5A,1.8A,2.1A,2.4A,2.7A,3.0A
* Over voltage, heat and short-circuit protection
Remember my motors are KL23H284-35-4B |