 just got new 5 x 10 table | |
hello I am confused I am running hyperthem 1250 (80 amp machine) cutting 1/4" steel. I cut some brackets and the edge was beveled. On the bottom it was beveled in, on the top it was beveled out. The holes are also the same way?????????? I checked my air it was at 70. The only way I could get it to cut decent was put voltage (sp) @140 and feedrate @ 45.It still left bevel on the piece. Do I need to turn voltage down on 1250 it is set on 80 now. Also does anyone have kerf settings (10ga-1/2")for this plasma machine. Is anyone around dallas tx area or phone number I can talk with. Work outta town 5 days a week and no access to internet. Thanks for your input |