We are a small job shop located in San Diego Ca. Our machinery consists of five Daewoo two axis Lathes , two Daewoo multi axis lathes, and six Haas milling machines. We have been using EZ CAM software for about 14 years . All of our lathes use EZ CAM V 16 Turn / Mill and our Mills use EZ CAM Mill software. We have considered many other software systems and even purchased Feature Mill and Feature Turn Mill 3D in a moment of weakness to the tune of about 20 K . The ease of use and the phone support offered by Chris Lalashius at EZ CAM is outstanding. The software is very easy to use , the Posts work perfectly with our machines. When we purchased our multi axis Turn / Mill Lathes EZ CAM created a Post for them in about a week , after a few refinements they worked perfectly. The EZ DNC express works great to download programs to the machines and is also very easy to use. I do not think that you will find a better quicker software value that has as many features and is as easy to use as EZ CAM . If you have any other concerns or questions please feel free to contact me , as long as you are not a sales person from another software company. Bill Sergent 619 448 8802  |