Originally Posted by justgary  Oops, I mean reamer (just toying with you, Randy). |
No slight intended on your own reamer, Just Gary! Not having ever done 4th axis work (and not having a rotary axis...) I would not be qualified to even comment on it.
But I can tell it is a nice piece of work. I must admit that I'm impressed with your "just harden it, temper it" phrase--heat treatment is something I have no experience at--sure I've heated a tool red-hot and plunged it into a can of old oil, but the tool came out glass-hard and only lasted until it chipped.
Randy