hi just wondering what brand,type, and line count you recomend for use with the viper 200. i have motors rated at 4500 rpm with 2-1 belts to a 5tpi ballscrew for x and y. the z is 1-1 on the belts with the same 5tpi ballscrew would like to be able to command to .0001 and rapid around 200ipm. i think this is possible with mach 3 and a 4x step muliplier with 1000 line encoders or would 2000 line with 8x step multiplier be better? any info would be apreciated. thanks, John
