Have you thought is right through
XYZ then U ??? would this not crunch on a 2nd op using the same tool at a different plane
IMHO it should be XYU then Z
if mi1$ > one & workofs$ <> prv_workofs$,
[
sav_absinc = absinc$
absinc$ = zero
pbld, n$,"G91 G28 Z0.", e$ #added
pbld, n$, sgabsinc, pwcs, pfxout, pfyout, pfcout, e$
pfzout, e$
pe_inc_calc
ps_inc_calc
absinc$ = sav_absinc |