Originally Posted by kscarsdale  I need some help with a trak dpm 3 i have mastercam and i am trying to post a program and send it to my machine, my machine does not recognize all of the commands what type of settings do i need to use in mastercam as far as machine type and other settings i might be missing to write a good program and send it to my machine. If anyone can help i would be very thankful. |
You need the right post processor for that machine. If you ask in the Mastercam Post area someone will help you edit a post. http://www.cnczone.com/forums/post_processors_mc/
__________________
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com |