Originally Posted by FandZ  Please post your results and how you fixed it. I'm going to be doing a test wireing of mine soon. Is thata keating power supply too? If so it looks like we will have nearly the same setup. |
Ended up being a bad pin in my parallel cable. It was shorted out to the solder cup.
Cleaned up the solder connection and everything works great.
Power Supply is the Keling KL-350-48 48v/7.3a
Package i bought is the second listed G540 3axis package
http://www.kelinginc.net/CNCNEMA23G540Package.html