Copper Cam is interesting to observe as it generates isolation paths.. but right now I would not recomend it UNLESS you are happy to do manual editing of generated toolpaths. It does not do a 100 % edge conversion.
It will leave tracks shorted out to rest of copper.
This was my experience with the software about 12 months ago.
I must admit I was very disapointed by the lack of decent performance; price is very approachable.
I had looked for suitable options and eventually settled on a professional gerber cam product written by Graphicode.
Its lightning fast in terms of conversion to G code no erronious output ( it did have a problem with very small feature which were converted to circles but the good people at Graphicode corrected their software and its as good as gold) affords flipping rotation step and repeat importation of multiple jobs and paneling.
It is not a hobby priced package however.
If anybody interested in sample g -code..send in the gerbers and excellon drill file |