Trilect,
It looks just like the one I bought new from Sears in 1980. I think I paid around $400 (with the stand). I've wore out one motor building a house (in Paintsville, Ky.) plus a lot of other projects. A new motor cost me $60 about 10yrs ago. Still getting a lot of good from it. I just put a new top on it this year. Made from MDF. If you need dimensions or anything let me know.
The manual tells the leveling / alignment sequence. Be sure you check that if you want to make accurate cuts.
I ordered the safety upgrade kit last summer. Still have not received it.
Bill |