Hey, my positioning table has arrived in the mail as well as my order from Keling. I wired things up with two push buttons to test things out and here is a vid of its first movement.
My first notes are this table is all metric, screws, pieces all nice and easy to convert metric.
The limit switches are one micro and one hall on each axis which is kind of weird unless the controller these where on read different voltage levels to figure out which limit it was. Im going to convert it all to switches though so at least its only two to replace. Limits are on nice ez-mount din rails with green plastic blocks so two screws and my new switches are mounted.
The table was being sold as 2x4" of travel but because the hall sensors actually stopped the table yet where movable the actual travel I now have is a whopping 100x150mm!! nearly 4x6" that makes this table one hell of a deal.