backplot in english and im using fanuc 0 that came with v23.
i dont know how to edit a post, i did change the numbering to start at 2 and count by two but that only seems to work on certain files.
the machine type is whatever bobcad v23 has as i got it.
there is no drop down for me to change it to a cincinatti vmc.
and my control programs like a plain fanuc.
how would i change the post to quit giving me an m08 for coolant.
ok current settings are for a mori mv40 mill. how do i change it to a cincinatti arrow 750. |