I hope it's okay to ressurect an older post with a newer question ... just didn't want to clog up the que with additional threads.
After posting my first message, I've come across an opportunity to use my X1 for some light-duty work as an engraver (award & recognition plaques). In my research, I came across a
company that had converted an X1 to cnc and then installed a Proxxon for use doing some engraving. This seems to be something common enough that the LittleMachineShop has a retro-kit to convert an X2. I know there are other machines better suited for engraving, but they're fairly pricey for the amount of engraving I'd be doing. And since I've already got the X1, I'd like to see if it will work for this application.
Does anyone here have experience using a Proxxon? I know that the X1 has some drawbacks in terms of backlash. I guess I'm wondering if you guys think a converted X1 could handle some simple engraving if it's set up correctly.
By the way, I discovered the thread about the Gecko G540 overrun deal and managed to get one (I think it was the last one they had). This forum is a wonderful resource for information!