Actually, I can't blame this one on anyone but myself. I went in and manually changed the "T"# in the NC file once I set up my tool table up in the control software and didn't realize that the "H"# had to match. I thought the tool height and tool was both selected by just the "T"#.
This one drove me crazy because the machine seemed to have a mind of it's own and no matter how many times I reset the "Z" tool tip origin it never maintained that value and would just change to something else on its own.
I have to admit that the whole tool offset issue makes a whole lot more sense to me now and that I am extremely grateful for all the help I received here. |