I have used Vytek lasers for years, we have 2 of the rebel II series. they are 4x8 285 watts each. they have optical arms instead of flying optics. vytek is located in Boston, or just outside boston. I have been there for training on the FX laser we purchased for engraving. a plus for having flying optics is gantry weight. smaller and lighter gantry means the machine can be faster and more acurate. our fx laser is a 120 watt machine and it can out cut our rebel on small parts from 1/8 acrylic, we do small dogtag like parts and the fx cuts the same part in 2/3rds the time. I never realized how much acceleration and deceleration make a difference. |