I don't have one, but I did watch a demo. I was impressed.
These machines have vector drives controlling the spindle I believe, so there's no real danger of overloading it, because the drive is intelligently monitoring the load and it will just trip out if overloaded.
I'd like to hear any user reports of how prone the machine is to vibrations, etc, while cutting the tougher materials, too. You won't be taking mammoth cuts of course, because its not got the horsepower for it.
__________________
First you get good, then you get fast. Then grouchiness sets in.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |