A) PRODUCT
B) BOUGHT FROM
C) COST D) P&P A1) Seig X2 Milling machine.
B1) Axminster.co.uk - bought on a Wednesday and got it next day, excellent service.
C1) £ 411.00
D1) Free
A2) 4 Axis CNC Driver Board
B2) Ebay = 330304735606 - Hector has a good website and its a very easy board to work with. (www.easy-cnc.com) C2) £ 78.05
D2) £ 10.00
A3) 3 x Nema 23 Stepper Motors (Part No: FL57STH56-3008B) - Dual Shaft
B3) www.slidesandballscrews.com
C3) £ 42.98
D3) £ 8.00
A4) DANTECH DA377 24V AC 4 AMP POWER SUPPLY UNIT
B4) Ebay - 220353668143 - can get them from
http://www.securitysales.org.uk/acat...ech_DA377.html for £41
C4) £ 12.50
D4) £ 8.94
A5) 8A Bridge rectifier 100v (To convert the above AC supply to DC)
B5) Ebay - 270314229523
C5) £ 0.99
D5) £ 1.30
A6) Electrolytic Capacitor 22000uF 35V (to smooth out the new DC voltage wave)
B6) Ebay - 120218280637
C6) £ 1.99
D6) £ 1.50
A7) Clamping Kit 58 Piece M10 Stud : 12mm Slot
B7) Ebay - 360121804948
C7) £ 28.95
D7) £ 8.00
A8) New ER40 MT3 Milling Chuck Holder lathe ER40 MK3
B8) Ebay - 160291395036
C8) £12.22 (converted from Australian Dollars)
D8) £7.72
RUNNING TOTAL = £634.13
Things I need to buy
1 2 3 Blocks
V Blocks - magnetic
X Axis DRO
y Axis DRO
Z Axis DRO
Rotary Table
4 Jaw Chuck
Nema 17 Stepper Motor for Rotary Table
ER40 Collets
Belt Driver Conversion (
www.harrisson.biz)
Addition things I bought that most members all ready have.
2" engineers square, Self Striking punch, Micrometer, 8% Cobalt Drills, Millers 100mm vice, 22 Square meter floor area workshop shed, Taps,