After exposing the 4 boards to UV light, the exposed resist was removed.
Not one of my favourite jobs !
The boards were then placed in the etching tank and overall I was quite happy with the track detail.
After washing the boards I hunted for some tin plating solution I knew I had somewhere.....
This certainly helps when soldering to the boards and it stops the copper contamination.
So with 4 boards etched I call it a day... I will drill them tomorrow. Oh how I will enjoy that....
(As a side note can anyone recommend a pcb prototyping company in the UK ?)
End of day 1
Image of boards after using the tin plating solution