Originally Posted by ViperTX Cute....a bindomatic...  you can probably patten it...but seriously, I suspect that you have an alignment problem, or is your base is not flat & stable to the movement that will torque your rails out-of-alignment. |
The "bindomatic" new word is something I read at one of John "cranky" ********** message somehwere.. It really defines my first go on the machine very well...
I used Igus bearings and the guy that made the mechanics for me ignored my warnings that the bearings should be at 1/2 the width of the space perpendicular to them as Igus clearly states for their bearings. It will just keep binding until that rule is covered or I get other kind of bearings.
Best regards,
Alexandre