I looked at the SHopSabre site, and for 12K you get a 4x5 with a 3HP columbo. A 5HP spindle and tool changer adds 10K more. The shopsabre is probably much lighter weight, and probably cuts much slower. Their cheapest vacuum system is 2K, a good one can run 7 to 10K. What are you comparing it too? A Komo or Thermwood or something like that?
__________________
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |