Originally Posted by dberndt
So, Microstepping might be nice, and I do plan on using it if I get a capable controller. Question, is microstepping as effective in preventing resonance and stalling problems on a 1.8 degree motor as something with bigger steps, such as a 7.5 degree motor. 1.8 degrees seems very standard but I could go for larger steps if there arent any side effects that I dont know about.
|
I haven't seen any info on people using motors with bigger steps. 1.8° is very common, or sometimes 0.9°. But yes, microstepping works very well (is almost a necessity, some would say) with 1.8° motors.