Yes it would be 1600 pulses for 1 rev. of the motor. I got as far as the 80,000 value but I wasn't sure if that was the value I had to enter into the "steps per units" box in Mach2 or if there was more calculations. It seemed way too high a value to be entered. Guess I was really missing an important part of the formula. I think part of the problem as I see now by how you figured that out is I kept on thinking in the way of, "steps per unit" when I should have been looking at it as "pulses per unit" or better yet "pulses per degree".
Thank you Al.
