THANKS FOR THE INPUT WMS BUT I DON'T THINK THE MOLD IS MOVING , IT SEEMS PRETTY SECURE .I RECUT THE TOOL THREE TIMES USEING THE SAME PROGRAMS JUST POSTING THEM DIFFERENT BECAUSE I HAD THEM GROUPED WITH SEMI FINISH ROUTINE AND I KEEP GETTING THE SAME RESULTS . I DO THE FINISH CUT AND THE PROGRAM THAT CLEANS UP THE RADII WITH A DIFFERENT , SMALLER CUTTER GOUGES ABOUT .010 EVERY TIME.EVERY TIME I CUT IT I DROP THE G54 .010 TOCLEAN-UP THE GOUGES AND AFTER IT'S HALF DONE I CHECK IT BE FOR THE OTHER CUTTER GOES IN AND IT'S OK UNTIL THE OTHER CUTTER GOES IN.
__________________
VIPERDM100 |