This may need to be in the Mach 2 forum. What I am seeing is plotted right but when executed the two G00 moves in succession are ran as a single line of code, not in single step though. I tried G61 exact stop mode with no difference. I broke the double G00's with a G01 and it executes properly.
(EXAMPLE)
N72 X0.049 Y0.016
N73 G00 Z0.100
G01
N74 G00 X0.308 Y0.011
N76 G01 Z-0.100 F5.0
Darek |