[keebler303]

Originally Posted by Jay C I don't use the auto-router much, but your Routing Grid (when you click the Autorouter button) should be set to 50mil. It is. What is your Bottom layer set to "-"? No, "|". I like to lay my own tracks. If doing a board only, I agree. But if you already have the schematic, its just too tempting to click that little button and see what happens. I still think its easier to go back and edit the autoroutes than from scratch, unless its dead simple. I also have an easier time soldering if the wire is close to the pad size By wire you mean trace? I don't really feel like it matters too much to me. Jay

Matt