You gentlemen sure are fast.
My intentions are to machine out the A B head myself, and power it with geared down servos. I will be designing everything, and my friend is a machinist.I left plenty of room in the Z axis to accomodate. I was thinking of using a small rotating table/indexer for part of it.
Correct me if I am wrong guys (and ladies):
I can pretty much build this machine and position servos anywhere, and the software will adjust to the machine. True/False?
As far as speed, is 40 fpm jog speed rediculous? I do not want to put coarser threads on this thing at the expense of accuracy. Say I want +- 0.005 inch accuracy. I am so new at this that I know I sound rediculous. So, without further ado, back to my rediculous demands...
I hope I can do all of this for under 12 grand...
Born Dallas/FT worth
Reside in Tenessee
Sounds like a country song... |