Hi all,
Just trying to find anyone in Perth, Western Australia who likes tinkering with CNC, I've just converted a mill myself
with a rockcliff controller but the PC im using maybe playing up
intermittent movements, seems like under voltage pulses from the Parallel port and not firing the opto's similar to what you would expect from a laptop with power saving mode on, sourced a PCI parallel card to try and see if that'll get it going.
BTW, I've migrated from the nightmarish MC433 enough said
! (not parallel port related, the board is just crap!)
Anyhoo, if your local give us a shout, or even if your not with a similar conversion, I will post photo's of the setup tonight when I get home from work, for all those interested peeps out there.
Adam.
www.xasertech.com