Merrittgene
I think Gerry gave the right answer...start reading and where to start all depends on your interest. You want to do a DIY machine for woodworking, I would start in the Wood Working Machines forum, reading the FAQ and DIY-CNC router Table machines posts first. Then maybe the CAD/CAM forums to see what is available for what I want to do. Then onto the Electronics to get a handle on what is required and what is available. So in many ways the information has been consolidated.
My first “try” at starting a build went nowhere, I did very little reading, and jumped on the 1st or 2nd idea I saw presented here or other places on the net. The material I purchased for that build is still setting in the garage or has long been trashed. |