Originally Posted by 1ctoolfool  yes this is for laser engraving, which the stl. does me no good.
I have looked at aspire and I plan to call them and see if they have this feature, it looks like the whole thing is based on greyscale.
thanks | AFAIK there is no way to export a greyscale from Aspire. I believe someone asked on Vectric's forum. http://www.vectric.com/forum/viewtopic.php?f=27&t=4305
__________________
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |