Sounds like many of the standard mills will work. You might consider the minicuts if the price is good. Dont' spend top dollar for performance EM's if your machine/applications don't warrent it. (For hobby stuff, the standard tooling will work just fine)
'Rekd teh All this talk about homemade routers and mills makes me wanna makes me one. 
__________________
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |