Originally Posted by DAB_Design Are you using a reversable tapping head, or does your spindle reverse? |
Since this is my first tapping project, I dont know what do you mean by "tapping head". But it is not an excuse. Im going to study and search what that means.
Im going to use a SANDVIK COROMAT tapper in a MAS CNC. The MAS CNC is controlled by and 2100 Acramatic control.
The MAS CNC can spindle in clockwise and counterclockwise direction.
I believe that my tapper is a "floating tapper" because the end moves in and out. The rigid tapper is the one that doesnt move, right?
As you can see, Im a newbie.
