Originally Posted by bclark6716  xjdubber,
That is the same machine I have and it will be an ER-16 collet. The collet taper is 1/2" to accept ER16. 3/8" shank will be the largest bit you can use. Magnate and Onsrude make a decent selection of 3/8" shank bits along with the neccessary collets. Your machine will only have a 6mm and 3.2mm collet with the supplied kit.
Brian |
yeah kinda what i figured, onsrud tooling is great ive worked a lot with their tooling before, might buy some collets of ebay though. How are you liking your machine?