Fish, I'm trying to use a different program. One that I made. I want to drop it in place of the cimco one. I just don't know what instruction is sent from MC to Cimco to tell it what file to send, -s or /t or /send or -xmit or -xfer or somethgin.
'Rekd
__________________
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |