Hello Bob,
Sorry for the delay in responding. As I mentioned to you over the
phone, it's been very hectic here for the last two or 3 weeks. Adding
to the turmoil of the end of year rush, I've recently transitioned into
this position and at the same time had to migrate the Ajaxcnc website
over to a new host which caused some loss of email due to the new spam
filters. It's been a rough few weeks to say the least.
As long as I'm here, I'd like to take this opportunity to introduce
myself to the Ajax community here. While I'm new to Ajax CNC, I've been
working with motion controls for 25 years and have spent the last 15
years working for Centroid in various capacities -everything from bench tech, support,
field service, training, sales to applications engineering and PLC programming.
If you're not familiar with the relationship between Centroid and Ajax,
Ajax essentially private labels the Centroid control hardware
and software.
If there is anybody here with any questions... please feel free to ask. I notice that there
is not a lot of traffic in here (the Ajax forum) but I will watch the forum pretty closely and
try to get back within a day.
Best regards,
Scott
sales@ajaxcnc.com