Originally Posted by pminmo OCNC (Chris)
But the line that is wired to r1 and c17 should have gone to JP1 pin 3 directly. Rather than fix it, its just as good to leave it off, nbd.
Phil |
I follow you regarding R5 but it looks to me like what you're calling R1 and C17 is actually
R18 and C17. The line that's wired to R18 and C17 is coming from pin 1 of the 40106N. Is this the line that you're saying should go directly to pin 3 on JP-1? Is this also nbd or did you re-route it in 'Version 2' of your board?
Chris