The get together went well. In attendance was Dick L., Stanv and myself.
A good time was had buy the three of us over coffee. We discussed where we are currently and where each of us is heading in the future.
We seem to have a nice mix of abilities. Dick is a long time machinist with years of cnc under his belt, Stan is a total noobie but has a fair knowledge of Autocad, and I have a pretty good handle on how to wire stuff and put it together.
Looks like we will me again next month for more of the same. If you would like to join us and are within driving distance , let me know by PM or reply to this post.
We are open to meeting at different places so no one has to drive too far every meeting. Stan and I live fairly close together and Dick had quite a drive. Next meeting will most likely be in Dick's neck of the woods or possibly at his shop. We will let you know where it will be held and what the date is going to be.
Mike
__________________
Warning: DIY CNC may cause extreme hair loss due to you pulling your hair out. |