OK Guys, I am missing something when I try to get SurfCams SDNC program to work with my VF-0. I Have about run out of "free trials" that all seem to work but I can't get SDNC that I own to work.
I have been trying everything. Right now the controller is set on 9600 baud 7 bit odd 1 stop bit xon xoff and ASCII but I think I have tried them all. I ran with some time date package at 8 even 1 stop bit 19.2 baud. I know my cable works fine, have been running for years on a DOS program but recently switch the DNC Machine to an Windows 2000 system thinking it would be easier and it is on the network but the link to the Haas through SDNC has me stumped.
Thanks for any help
Eagle |