Rent a concrete saw from Home Depot, and cut out the slab where the machine will go. Then either pour a new 8" slab, or put a small footing where each of the machines pads will be and repour the 4" slab. Should be able to do it for $500-$1000.
What about the 3 Phase power you'll probably need?
__________________
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |