Hi Guys,
I'm trying to figure out the correct transformer and CAP I need to make a power supply for my servos and drives.
I'm going to have 4 Viper 200 servo drives and I need 120-130 Volts and 15 amps RMS to power my servos.
I'm a bit confused as to what VA number I need for the transformer.
I do have a 500 VA 115V power supply that came out of the machine but my guess is that this is not big enough?....It has H1 H2 H3 H4 with 0v/208v/230v/460v respectively on the input side and on the secondary side has X1/X2/XF(filter) .
Any help would be appreciated
