Hi Dan,
It is a Journeyman 325. You must have missed the long thread(s) on it over at PM in the CNC forum. Just do a quick search there and it will turn up. I think mine has Baldor servo motors, but I really haven't looked at them since I placed the order so I can't say that I'm remembering correctly. I think the spindle drive is Yaskawa, but the same caveat applies. If it isn't critical that I remember something it often doesn't get remembered.
If I need to know who manufactured the parts, I'll just look at them again.
I'm hoping that I'll not only get the control stuff in time for my week off over Thanksgiving, but that the electrician will also show up in time to ensure that I'll have some 3-phase power to feed the machinery. I need to run the Delta20 control a bit before I take it off so I can take some photos of the different screens to show to someone who is interested in buying it as a spare for his 325.
The DynaPath is said to be a decent control, but the digitizing features are a big interest to me, and it makes sense to me for the long run to upgrade the control. I've been instructed by the person I'm dealing with to rewire from the control to the servos and limit switches and anything else like that, as he says the old wiring is often the cause of those odd problems that can drive someone even battier than they already are.
That kind of advice makes sense to me.
edited to add a
link to the referenced thread.
cheers,
Michael