From a 4th axis VH65 to a 5th axis TR65 | |
I know this is an old post but you guys are still on cnczone so I'm asking for direction. If I have my machine set up with a VH65 and want to go to a TR65(Tilt/rotate) do I duplicate the gear from A axis (4th) to do the B axis (5th) I understand I have to get the Axis or maybe its the Amp Board with the right EProm on it. Basically what do I need to transition. The VH65 set up now is dc servos and my VMC3016 is ac (2006 reman) |