Hi all for the past year I have been designing and making my very own cnc
router and have finaly got somthing to show for it I have very nearly made itand would like some help on what stepper motors to use I was looking at this kit
http://www.motioncontrolproducts.co....products_id=58 and am not sure if they are a good make and if they have the power to move my gantry. The size of my cnc is about 1m by 0.8m working area the moving gantry is about 35kg rather heavy tbh pics to follow shortly.
So to recap asre these motors,power supply etc any good are the a well known make and from the spec sheet of the motors etc have they got a fair bit of power?.
p.s just getting photos now brb.
thanks in advance dan