Dave I really think you are going to like the MC-X when it comes out, just by your reply.
As for the Lin & shu it does have allot of info. I have found over the years there are some issues and misstatements but over all it does cover allot.
The older versions of this book covered Mill and lathe and solids was Sep.
What is the one main issue I found is that it has a statement saying you can not 2d path a solid model. WHAT!!!!. Well we know that wrong.
If you get a chance look at the Volume series of book from Charles Davis his books go into direct detail of your options with a definition.
Dave also what is your board name on the Mastercam forum?
Thanks jay
__________________
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Mastercam Instructor , Programming Consultant and ME (Manufacturing Eng) |